Fortress-Power Monitoring Set-Up Guide

Fortress-Power Monitoring Set-Up Guide

1. Download the Envy Fortress Power APP, Located in both the Apple App Store and Google Play Store on a mobile device.

How to set up the Envy Inverter Wi-Fi Dongle: Watch the YouTube Video

2. Plug the Dongle to the inverter while inverter is energized.

3. Connect to the Dongles Wi-Fi Network, usually named BA********
4. Access the Envy App and Press the WIFI Module Connect.
5. Proceed to integrate the Dongle to the Home Wi-Fi by inputting the router’s SSID and Password. Server must be Set to North America. After clicking on Set, Click HomeWifi Connect. The Dongle will display 3 solid LED’s if the connection is successful. This may take 1 minute after selecting Home WIFI Connect.



If your cellphone does locate the customer’s Router as shown on the 5th step image, then proceed to access the web browser on your cellphone or laptop while being connected to the dongle’s Wi-Fi signal as seen in the 3rd step image. Type 10.10.10.1>User: admin, Password: admin. Select English on the top right side. Next, Select Station Mode Setting and input the internet router’s SSID and Password. Save and confirm that the Dongle has been integrated successfully by displaying 3 solid LEDs after 1 minute. Warning. You must not access nor change any other values in this web portal. Doing so, may break the Dongle and make it inoperable.

6. Select Register Tab
7. Complete End User Registration. Create End User username, password and make sure to select the correct Continent, Region, Country, Time zone and physical Address. The Customer (Installer) Code is fortress for DIY users. The serial number and pin of the dongle are located on the side of the dongle and the packaging box.
8. Once Registered, the user can access the End User Portal where they can view direction of power flow, Solar, Battery, Export, and Consumption Data.


    • Related Articles

    • Monitoring Your Tesla System

      Configure Internet Connection Tesla-PW3 Internet connectivity is required to receive the full 10-year Powerwall warranty, and to see the system in the Tesla App. Connect Powerwall 3 home Wi-Fi. Ensure that Ethernet is connected if Wi-Fi signal is not ...

    • Installing Consumption CTs for Consumption monitoring

      Consumption monitoring is an optional feature of the Enphase system that measures the energy usage in your home. It measures the use of electricity in your home. It is a measurement of how much and when you are using electricity and is does not ...

    • Hoymiles Wi‑Fi Setup & Monitoring Guide

      Wi‑Fi Setup & Commissioning For a full walkthrough of the Wi‑Fi setup and commissioning process, Click here to watch the instructional video DTS Registration & Installer Account Access To activate monitoring and receive installer‑level login ...

    • Goodwe inverter Wifi connection guide

      Required before initiating the sequence Physical access to your Goodwe inverter. A Wi-Fi-enabled device such as a smartphone or tablet. Patience, the average reconnection time is 10mins. Step 1: Activate WiFi Access Point 1. Open your Goodwe SEMS ...

    • Sol-Ark Inverter Monitoring

      The following are the Sol-Ark inverter installation instructions. If you want to access your solar system online, you first need to create a Sol-Ark account, and here is a video tutorial on how to do it. With an account in place, you get the inverter ...